标王 热搜: 钣金加工  机柜  操作台  机盖  机箱  配电柜  仿威图机柜  威图ES  香河  折弯机 
 
发布信息当前位置: 首页 » 钣金图片 » 钣金加工 » ZRCT 530 低压电动机保护装置

ZRCT 530 低压电动机保护装置

点击_ZRCT 530 低压电动机保护装置_钣金图片查看原图
型号: ZRCT 530 |
单价: 面议
起订:
供货总量:
发货期限: 自买家付款之日起 3 天内发货
所在地: 河北 廊坊市
有效期至: 长期有效
最后更新: 2019-09-19 09:43
浏览次数: 240
询价

 

ZRCT 530 低压电动机保护装置_钣金厂家_基本资料信息

 
 
ZRCT 530 低压电动机保护装置_钣金产品_详细说明

ZRCT 530 低压电动机保护
ZRCT 530 Low Voltage Motor Protection
测量功能:三相电流、三相相电压、三相线电压、零序电流、负序电流、零序电压、有功功率、无功功率、功率因数、频率。
Measurement function: Three-phase current, three-phase voltage, three-phase line voltage, zero-sequence current, negative-sequence current, zero-sequence voltage, active power, reactive power, power factor, frequency.
保护功能:过流保护、速断保护、过压保护、欠压保护、反时限保护、热过负荷保护。      
Protection function: Over-current protection, quick-break protection, over-voltage protection, under-voltage protection, Counter-time protection, thermal overload protection.         

开关量输入:6路开关量输入,交直流220V通用。
Switch input: 6-way switch input, AC and DC 220V universal.
开关量输出:3路开关量输出,输出容量:250V/AC  8A /30VDC  8A。
Switch output: 3-way switching output, output capacity: 250V/AC 8A /30VDC 8A。
定值设定:各种保护定值设定、查询。■ 通讯功能:MODBUS-RTU协议。
Fixed value setting: All kinds of protection fixed value setting, query. Communication function: MODBUS-RTU protocol.
故障信息:实时查询故障、报警记录。■ 参数设定:地址、波特率等参数设定、查询。
Fault information: Real-time inquiry of fault and alarm records. Parameter setting: Setting and inquiring parameters such as address and baud rate. 
安装开孔尺寸:88mmx88mm(长x宽)
Installation hole size: 88mm x 88mm (length x width) 
0条 [查看全部]  相关评论
 
更多»ZRCT 530 低压电动机保护装置_钣金厂家_其它产品

[ 钣金图片钣金搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]

 
网站首页 | 关于我们 | 联系方式 | 使用协议 | 版权隐私 | 网站地图 | 排名推广 | 广告服务 | 积分换礼 | 网站留言 | RSS订阅 | 京ICP备15058963号-3
X

钣金微信号:banjin