02 辽宁照车牌监控杆 道闸杆

采用混凝土加钢筋笼浇注，4米以下预埋件尺寸不小于0.3m*0.3m*6.0m灌浇水泥尺寸不小于0.4m×0.4m×0.6m。4至6米立杆预埋件尺寸不小于0.3m*0.3m*1.0m灌浇水泥尺寸不小于0.5m×0.5m×1.2m。6至10米立杆预埋件尺寸不小于0.4m*0.4m*1.2m灌浇水泥尺寸不小于0.6m×0.6m×1.5m。预埋走线管道，走线管道管径不小于40mm，转弯半径不小于200mm，用于窨井与立杆间走线。

Adopt concrete and steel reinforcement cage, 4 meters embedded parts size is not less than 0.3 m * 0.3 m * 6.0 m poured cement size is not less than 0.4 m * 0.4 m * 0.4 m.4 to 6 meters poling embedded parts size is not less than 0.3 m * 0.3 m * 1.0 m poured cement size is not less than 0.5 m * 0.5 m * 0.5 m.6 to 10 meters poling embedded parts size is not less than 0.4 m * 0.4 m * 1.2 m poured cement size is not less than 0.6 m * 0.6 m * 0.6 m.Embed line pipe, line pipe diameter not less than 40 mm, bending radius should not less than 200 mm, used to walk line between CMC and poling.