标王 热搜: 钣金加工  机柜  操作台  机盖  机箱  配电柜  仿威图机柜  威图ES  香河  折弯机 
 
发布信息当前位置: 首页 » 钣金图片 » 钣金加工 » 升降机 » 升降机 移动升降车

升降机 移动升降车

点击_升降机 移动升降车_钣金图片查看原图
单价: 面议
起订:
供货总量:
发货期限: 自买家付款之日起 3 天内发货
所在地: 北京
有效期至: 长期有效
最后更新: 2016-10-09 14:10
浏览次数: 249
询价

 

升降机 移动升降车_钣金厂家_基本资料信息

 
 
升降机 移动升降车_钣金产品_详细说明

移动式升降机的使用注意事项:
①撑开支腿,调整支腿螺栓,使升降台保持水平,然后锁定支腿定位栓;接通电源并打开电源,待指示灯亮后试车一次即可进行工作。
②按规定载荷工作,严禁超载使用,在特殊应急情况下最多不得超载10%;在没有安全护栏的固定式升降台上严禁载人工作;
③在动作过程和处于上升位置时,不得移动升降台;升降台工作时,必须撑开支腿,严禁在工作平台上作激烈的人为摇晃。严禁在工作台上进行任何带电作业。

The use of mobile lift considerations:
(1) through spending leg, adjust the leg bolts, keep the lifting platform, then the locking leg positioning bolt;And open the power supply, power supply is connected to indicator after commissioning work can be made at a time.
(2) in accordance with the provisions, work load, overload is strictly prohibited to use, in special emergency cases most should not overload 10%;In the absence of security fence stationary lift tables are strictly forbidden to manned work;
(3) the action process and in the up position, lifting platform cannot be moved;Lifting platform to work, must maintain spending leg, it is strictly prohibited in working platforms for intense shaking.It is forbidden to make any charged on the workbench.


0条 [查看全部]  相关评论
 
更多»升降机 移动升降车_钣金厂家_其它产品

[ 钣金图片钣金搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]

 
网站首页 | 关于我们 | 联系方式 | 使用协议 | 版权隐私 | 网站地图 | 排名推广 | 广告服务 | 积分换礼 | 网站留言 | RSS订阅 | 京ICP备15058963号-3
X

钣金微信号:banjin