标王 热搜: 钣金加工  机柜  操作台  机盖  机箱  配电柜  仿威图机柜  香河  折弯机  威图ES 
 
发布信息当前位置: 首页 » 钣金图片 » 钣金加工 » 胶板家具 » 屏风 » 苏州办公家具屏风工作位

苏州办公家具屏风工作位

点击_苏州办公家具屏风工作位_钣金图片查看原图
型号: PF-07
规格: 可根据用户需求定制
单价: 面议
起订: 1
供货总量: 271
发货期限: 自买家付款之日起 1 天内发货
所在地: 北京
有效期至: 长期有效
最后更新: 2016-09-10 14:04
浏览次数: 973
询价

 

苏州办公家具屏风工作位_钣金厂家_基本资料信息

 
 
苏州办公家具屏风工作位_钣金产品_详细说明



屏风厚22mm。板材采用18mm实心三胺板或刨花板。线盒厚40mm,双面共用,内有分线槽分隔强弱电,只可台下走线,线槽位置距底部100mm以上。穿线孔最小孔径为(80*13mm)*2孔。有竖线盒,可竖向走线。台上可配置文具挂件铝槽,台底可配置装饰踢脚板。屏风最高高度建议为1.8米。铝型材由名牌企业凤铝、新河公司开模制作,不馋杂任何废铝杂铝,表面处理一流,经反复摩擦不会变色、发黑。型材强度高,经折弯试验回复弹性强。品质稳定、优良。根据各部位受力需求,铝材厚度由1.2至1.5mm不等。板材主要采用行业高端品牌标准公司E1级环保板材。布料采用台湾颐达布料。独创连接结构,是世界上安装配件最少的屏风。安装简捷、方便。

Screen 22 mm thick.Plate with 18 mm solid three amine board or particieboard.Box 40 mm thick, double-sided Shared with groove space and weak electricity, could only walk from the line, the line position is 100 mm from the bottom of the tank above.Threading hole are minimum aperture (13 mm) 80 * * 2 holes.A vertical bar boxes, can walk the vertical line.Stage can be configured stationery accessories aluminum groove, bottom can be configured to decorate skirting board.Screen top proposal of 1.8 m.Feng aluminum aluminum by famous brand enterprises, xinhe companies open mold production, no waste chan miscellaneous miscellaneous aluminum, aluminum surface treatment, after repeated friction will not change color, black.Profile with high intensity, the reply elasticity bending test.Stable quality, good.According to the requirements of each part stress, aluminum thickness ranged from 1.2 to 1.5 mm.Plate mainly adopts industry high-end brand standards E1 class environmental protection plate.Adopt Taiwan versa cloth fabric.Original connection structure, is the screen of the installation accessories at least in the world.Simple and convenient installation.




0条 [查看全部]  相关评论
 
更多»苏州办公家具屏风工作位_钣金厂家_其它产品

[ 钣金图片钣金搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]

 
网站首页 | 关于我们 | 联系方式 | 使用协议 | 版权隐私 | 网站地图 | 排名推广 | 广告服务 | 积分换礼 | 网站留言 | RSS订阅 | 京ICP备15058963号-3
X

钣金微信号:banjin