点击_TD型网络机柜_钣金图片查看原图
[VIP第9年] 指数:6
通过认证 
主要性能及规格
The main performance and specifications
◆ 标准:符合ANSI/EIA RS-310-D、IEC297-2、DIN41491；PART1、DIN41494；PART7、 GB/T3047.2- 92标准；兼容ETSI标准;
◆ 特点:弧形高密度六角网孔前门及高密度六角网孔后门，一揽子解决机械保护、通风散热、外部观察机械运行状态三方面的使用要求；
◆通风率达到71.2%前后为圆形通风孔的上下框；外观设计高贵典雅，工艺精，尺寸精密，极富时代气息，为您的工程增添价值；
◆关闭的上部、下部多处走线通道，底部大走线孔;尺寸可按需调整；
◆可选配安装，达到固定机柜、底部过线;
◆底部送冷风、防鼠的要求；
◆高效坚固的并柜连接；
◆齐全的可选配件。
◆Standard: in accordance with ANSI/EIA RS - 310 - D, IEC297-2, DIN41491;PART1, DIN41494;PART7, GB/T3047.2-92 standard;Compatible with ETSI standards;
◆Characteristics: arc high-density hexagonal mesh front door and high density hexagonal mesh back door, solving the mechanical protection, ventilation cooling, external observation the use requirements of the machine running state three aspects;
◆In pieces before and after the ventilation rate of 71.2% for circular vent box up and down;Elegant appearance design, process fine, size precision, extremely rich period flavor, add value to your project.
◆Pieces to close more than the upper and lower line channel, a big line at the bottom of the hole;Size can be adjusted as needed;
◆Optional installation, fixed rack, the bottom line;
◆At the bottom of the mixer to send the cold wind, the requirement of rat;
◆In pieces efficient solid and tank connection;
◆Pieces of optional accessories.
